SDS Analysis and Analysis Services (Safety Data Sheet)
Security in use, storage, transport, and chemical management requires accurate and accountable technical information. SDS (Safety Data Sheet) or Safety Data Sheets became one of the most important documents that provide information about product identities, physical and chemical properties, danger, handling, storage, to an emergency action in exposure or incident.
For industrial products, especially Oil & Gas, petroleum product, fuel, lubricant, hydrocarbon, chemical, and other industrial materials, SDS drafting requires sufficient product characteristics. That data can be obtained through lab testing and analysis so that the information listed in SDS is not only administrative, but supported by product technical data.
PT Hidea Core provides lab analysis services and support drafting SDS based on the characteristics and needs of tested products.
Data-based Laboratory Analysis Expert
For producers, distributors, imports, and industrial materials users, laboratory data availability can help improve SDS security information quality.
Some of the superior approaches based lab testing include:
- Product Data By Testing Results Physical and chemical characteristics of products can be supported by lab testing results, so the technical information in SDS has a stronger data base.
- Physical and Chemical characteristic identification Testing can be done to get such parameters density, viscosity, flash pointst, pour point, water content, sulfur, discipline, and chemical composition, as well as the product needs.
- Support Product Danger Identification Analytic data can be used as support's technical information in determining the characteristics of the dangers of products, including the flammobility, physical hazards, and chemical properties.
- Match for Oil & Gas and Chemical Products Service can be used for various products such as crude oil, fuel oil, biodiesel, petroleum products, lubricant, hydrocarbon, solvent, chemical, and other industrial products.
- Data for Industrial Documentation Requests The test results can be used as part of company's technical documentation, including SDS needs, product specifications, technicality, vendor assembly, and procurement need.
Lab Data Specification for SDS
Not all products require the same testing parameters. The test type can be adjusted to product characteristics, composition, purpose usage, and information required for SDS documentation.
| Analysis Parameters | Provided Data |
|---|---|
| Density / Specific Gravity | Type mass characteristic and relative density of products |
| Viscosity | The characteristic of the product stream |
| Flash Point | The characteristic information of the product's easiest to produce lit steam |
| Pour Point | The lowest temperature characteristic related to product aliases |
| Water Content | Water content in products |
| Sulfur Content | sulfur content |
| System | volatile characteristic and boiling point range |
| Gravity API | The characteristic density relative products of petroleum |
| Chemical Composition | Composition information or product chemical components |
| Other Specific Parameters | Other parameters are adjusted to product types and analysis needs |
The parameters don't have to be entirely done on each product. The test selection is based on the necessary material and technical information.
Supported Products with SDS Analysis
Lab analysis services for SDS needs can be applied to various types of industrial products, among other things:
- Fuel & Petroleum Products
Analysis of diesel fuel, gasoline, biodiesel, fuel oil, kerosene, and petroleum products. - Crude Oil & Hydrocarbon Products
Testing characteristics of oil crudes, condensate, naphtha, hydrocarbon mixture, and the product of petroleum. - Lubricant & Oil Products
Analysis of different kinds of lubricating oil, base oil, used oil, and oil-based products. - Chemical Products
Testing physical and chemical characteristics of chemical materials, solvent, industrial chemical, as well as material with certain composition. - Gas & Gamo-related Products
Analysis of composition and the characteristics of gas correspond to sample types and technical needs. - Other Industrial Product
Testing can be developed based on the type of samples, the characteristics of materials, and the parameters needed for drafting product documentation.
SDS Analysis and Drawing Array
Lab-based approach can be performed through integrated stages:
Sample Laboratory Testing Analytical Data
- Product Identification
Information about product names, usage, material forms, as well as early technical information collected. - Test Parameters Enhancement
Lab parameters are determined based on product characteristics and documentation needs. - Laboratory Testing
Samples are analyzed using testing methods that match the required parameters. - Interpretation of Results
The test data was used to understand the physical characteristics and chemistry of the product. - SDS Supporter Data Providence
Analysis results are part of the technical data that can be used to support documentation Save Data Sheet (SDS).
SDS, COA and TDS have different functions
In the industry's documentation, SDS is not the same as COA or TDS.
| Document | Main Function |
|---|---|
| SDS (Safe Data Sheet) | Safety information, danger, handling, storage, and emergency action products |
| COA (Certification of Analysis) | Shows the test results and matching product parameters to specifications |
| TDS (Technical Data Sheet) | Explains the technical characteristics and performance of products for technical / use needs |
Therefore, lab testing results can be a vital source of data for some type of document products, but the format and purpose of each document remains different.
Lab Testing to Support Oil & Gas Product SDS
In sectors Oil & Gas, the need for data to document products can be more complex because material characteristics are very diverse.
For example, petroleum products can need information about density, API gravity, visibility, flash point, pour point, sulphur, water content, distilation characteristic and chemical composition.
For certain hydrocarbon products, Gas Chromatography (GC) can also be used to acquire composition information. In the meantime, other analysis methods can be used to determine the physical and chemical characteristics to suit the product needs.
Thus, the lab analysis approach to the characteristic of SDS products can help the company obtain more structured technical data.
Power Hidea SDS Analysis Service
PT Hidea Core Support industry needs through service testing and lab analysis for various Oil & Gas products, petroleum, fuel, lubricant, hydrocarbon, and chemical products.
Testing can be adjusted to:
- The product and material type
- Required parameters
- Target for data usage
- Customer specifications or requirements
- Matching test method
- The need for technical documentation of the company
For SDS, lab testing results can be used as support technical data in the drafting and safety data Sheet evaluation.
Verification and Consult SDS Analysis Required
Before doing testing, the company can consult to determine a laboratory parameter relevant to product characteristics.
This is important because the need for fuel, oil crudes, lubricant, hydrocarbon, chemical, and other materials can be different.
PT Hidea Core Ready to help lab analysis services to support SDS data and industrial technical documentation.
To consult the parameters and the need for SDS testing:
PT Hidea Core
Industrial Area and Tekno Park, 18 Block J1, BSD, South Attack, Banten
Email: labservices@hidea.id
WhatsApp: +6287764945736
